Aus Display Documentation in German

Version vom 08:31, 18. Jun. 2008

MediaWiki has been successfully installed.

Consult the User's Guide for information on using the wiki software.

Getting started

• Configuration settings list
• MediaWiki FAQ
• MediaWiki release mailing list

Display User's Guide

General information on Display User's guide

• Diplay contacts
• Introduction
• Table of contents
• List of tables

Summary

• 1 INTRODUCTION
  
• 2 FEATURES AND STRUCTURE OF THE DISPLAY® POSTER GENERATION TOOL
  
• 3 GETTING STARTED
  
  • 3.1 REGISTER FOR DISPLAY®
    
  • 3.2 LOGIN TO THE PARTICIPANTS SECTION
    
  • 3.3 MY ACCOUNT
    
    • 3.3.1 My data
      
    • 3.3.2 My poster
      
    • 3.3.3 My organisation 13
      
    • 3.3.4 My translations 13
      
• 4 CREATE A POSTER14
  
  • 4.1 POSTER EDITION 14
    
  • 4.2 ADD A BUILDING 14
    
    • 4.2.1 On-line help 15
      
    • 4.2.2 Entering General Information on Your Buildings 16
      
  • 4.3 CREATE A POSTER 20
    
    • 4.3.1 Overview of data needed to produce a poster 20
      
    • 4.3.2 Finishing Your Display® Poster Generation 23
      
    • 4.3.3 Detail description of data needed to produce a poster 24
      
    • 4.3.4 Handling Special Cases 31
      
  • 4.4 MANAGE YOUR DATA 31
    
    • 4.4.1 List of Buildings 31
      
    • 4.4.2 List of Calculations 32
      
• 5 ANALYSE YOUR BUILDING DATA 34
  
  • 5.1 LOCAL AND NATIONAL STATISTICS 34
    
  • 5.2 DOWNLOADS 36
    
• 6 THE DISPLAY® METHODOLOGY 37
  
  • 6.1 CONVERSION OF FINAL ENERGY INTO PRIMARY ENERGY AND CALCULATION OF CO2 EMISSIONS 38
    
    • 6.1.1 The General Approach 38
      
    • 6.1.2 Local weather Correction 39
      
    • 6.1.3 Non-Electrical Energy Consumption 41
      
    • 6.1.4 Electricity Consumption 41
      
    • 6.1.5 CO2 Emissions 43
      
  • 6.2 CALCULATION OF THE RATIOS AND APPLYING THE CLASSIFICATION SCHEME 44
    
  • 6.3 SPECIFICATION OF THE CONTRIBUTION OF DIFFERENT ENERGY SOURCES 45
    
  • 6.4 VISUALISING SAVINGS ACHIEVED BY GETTING INTO A HIGHER CLASS 47
    
• 7 SUPPORT AND CONTACT INFORMATION49
  
• 8 APPENDICES50
  
  • 8.1 THE CLASSIFICATION SCHEME 50
    
  • 8.2 CONVERSION FACTORS AND THEIR SOURCES 54
    
  • 8.3 GLOSSARY 57
    

2 Features and Structure of the Display® Poster Generation Tool

The poster generation tool helps you to create your own Display® poster. Having entered all the necessary information it works autonomously and immediately makes available a printable poster in pdf format. It uses a calculation tool that initially determines the buildings’ primary energy consumption. Afterwards the instrument calculates the primary energy ratio, the consumption of primary energy per square metre of the gross internal floor area of the building. According to its building type, be it educational, administrative or another kind, the building is graded into a classification scheme of six classes: A to G similar to the well known certification scheme used for household appliances.
Concerning CO2 emissions, the tool performs a near identical procedure. The production, transport, and consumption of every unit of whatever fossil energy source emits a certain amount of greenhouse gas, measured in kg of CO2 equivalents. This unit is utilised so as not to forget the emission of other greenhouse gases. To simplify the term “greenhouse gas emissions measured in kg of CO2 equivalents” in the following sections of this users’ guide the term “CO2 emissions” will be used as an equivalent. Similar to the primary energy consumption, the tool calculates the C02 ratio, the CO2 emissions in kg of C02 equivalents per square metre. Again, this ratio serves as a criterion for the grading of the building into a scheme of seven classes.
Water consumption can be treated in an easier way. The water ratio, the consumption of the building in litres per square metre, is used as a performance indicator.
Furthermore, the calculation instrument takes into account the building type when grading the building into one of the six classes. In the case of swimming pools the water ratio is calculated per swimmer!
Starting in the public area of the Display® website it is possible to enter the restricted area by entering your login data. After a successful login you will be directed to the buildings page. You have the following possibilities to continue that are divided into four subsections:

• POSTER EDITION

• • add, update or delete your building data by selecting buildings,
  • add, update or delete your existing calculation data, and download your poster by selecting ***Posters,
  • consult the online version of the user guide by clicking on User guide,

• DATA TREATMENT

• • analyse your building stock in the Local statistics section,
  • compare your performances with the National statistics,
  • download your building data in a spreadsheet format by clicking on downloads,

• MY ACCOUNT

• • Choose your preferences by clicking on My data and change your password, set your language preferences and update your contact details,
  • upload your organisation’s logo and ensure that you have the correct contact details for your poster by clicking on My poster,
  • translate the calculation tool and registration form into your mother tongue by choosing My translations
  • In order to add other members of the staff and ensure that the promotion of your organisation is clear and understandable choose My organisation

• MEMBERS ON LINE

The Members on line option is only available if you click on My preferences (top right of the page) or My data, subsection My preferences and choose the option - view members on line.

The structure of the Display® participants section of the website is shown in figure 1 below.